UEFA Europa League

* The UEFA Europa Leagueengine belt is a very important part of the car engine. It is connected to theSeveral key components of the engine, such as engine crankshaft, camshaft, flywheel, etc., make the engine run normally. Because its role is very important, its wear and damage will have a serious impact on the whole engine. Therefore, it is very necessary to replace the engine belt in time. Now, I will introduce the skills of replacing the engine belt. 1. Confirm the replacement time. Normally, the replacement time of the engine belt has a certain relationship with the mileage of the car. New cars are generally calculated from the time of purchase, and the time will also depend on different models. However, in recent years, many vehicle manufacturers have changed the replacement time and explained it in detail in the instructions for use. Generally speaking, the replacement time mentioned in the instructions for use of the vehicle is 5 years or 100,000 kilometers. If you are worried that you can't remember this time, you can mark it in the car or remind yourself to check at a specific time.Two. Preparing tools and spare parts to replace the engine belt requires certain tools and spare parts. Usually, you need to prepare pulley wrenches, enamel hammers, hexagon wrenches, jacks, pulley drive tools and other tools. You also need to buy a new engine belt and other necessary spare parts. 3. Remove the old engine belt. When removing the old engine belt, you need to loosen and remove all the parts related to the belt first. During the disassembly process, you should pay attention to the position of each part, so that you can position it correctly when reinstalling the engine belt. Four. Cleaning and inspection parts After removing the engine belt, check all relevant parts, including belt tensioners, turbine pulleys, inverter pulleys, etc., to ensure that they are intact. At the same time, cleaning work should also be carried out to clean off the oil scale and dust on it.5. Install a new engine belt. Before installing a new engine belt, you need to set the correct tension of the belt. The new engine belt may be tighter than the old belt, so you need to check whether the tension of the belt is correct before tightening all the parts. If you are not sure how to adjust the tension of the engine belt, please refer to the relevant car repair guide or consult professional technicians. 6. Adjust the belt tension. After you confirm that the belt tension is correct, you can reinstall all relevant parts and tighten the engine belt. You need to use a pulley wrench to adjust the belt tension to the correct level. When the belt tension is adjusted to the correct level, use an enamel hammer to knock on the pulley to ensure that the belt buckle is in place. 7. Check the installation quality. After checking the installation, you need to start the engine and check the working condition of the engine belt.After checking, you need to remove the jack of the vehicle and drive a few miles or conduct a certain driving test to ensure that all the work is done correctly and the engine is running normally, and then you can enjoy a pleasant driving journey with confidence. In a word, replacing the engine belt is a very important task. Correct replacement can make your vehicle safer, more stable and more efficient. If you are not sure about your skills or do not have enough experience, you'd better ask a professional technician for help. In terms of installation, adjustment and inspection, do not ignore any step to ensure that your vehicle is safer and more reliable in use.

Contact Us
Phone：020-83484661