Bingo Plus stock

List of catalogs of this article:

• 1,Can the inside of the curved beam motorcycle engine be cleaned with gasoline
• 2, Is it okay to install a 125 carburetor in the bent beam motorcycle engine?
• 3、 Can the engine of the curved beam motorcycle be repaired by itself?

Can the inside of the curved beam motorcycle engine be cleaned with gasoline

Yes, but you have to follow the machineOil mixed cleaning, not only with gasoline, without disassembly, let the engine idle. The power unit of the motorcycle adopts internal combustion engine.

Motorcycle engine oil stains can be cleaned with a mixture of 1:1 gasoline and lubricating oil. First of all, you should preheat the vehicle and feel that the edge cover of the engine clutch can be slightly hot, so that all the oil inside the engine can be cleaned.

If gasoline is poured into the inside of the engine for cleaning, this is not possible. Because all the cleaned gasoline cannot be cleaned, the remaining gasoline is mixed with the new oil added, which will change the nature of the oil and make it lose its original function.

The oil filter of Zongshen zs110-9s curved beam motorcycle is installed in the right box of the engine. The oil must be removed and the right cover of the engine can be removed to see that it is installed above the oil release screw.

Yes. The use of engine cleaner is very simple. You can clean and maintain the inside of the engine without disassembling the engine. Engine cleaning is generally carried out when changing the oil, and all kinds of gasoline engines can be used.

Is it okay to install a 125 carburetor in the bent beam motorcycle engine?

The carburetor of the motorcycle should be matched with the engine, etc. Changing to an inappropriate carburetor may cause adverse reactions to fuel consumption, power, start-up and speed.

The carburetor (small) is replaced with a 125 carburetor (large), and its caliber is different unless the variable diameter pipe is modified. If the original small one is changed to a large one, the engine tends to have "indigestion" and consume fuel; if the original large one is changed to a small one, there is a tendency to "not enough to eat" and feel insufficient power. This is the result of the engine being unchanged and replacing different displacement oilizers.

The difference is very small. WH125-6 can be replaced with WY125-S carburetor. However, the WH125-6 original car carburetor of the second country generally has better performance than the 125-third carburetor of the country. In order to meet the standard of environmental protection, the third carburetor limits the amount of fuel injection, and may be slightly inferior to the carburetor of the second national second car in terms of power, acceleration, start-up and other aspects.

Can the engine of the curved beam motorcycle be repaired by itself?

1. If you change the CC125 variable speed cam and fork, the left box of the engine does not need to be opened, and the crankshaft does not need to be removed, and the variable speed mechanism can be replaced. Misoperation will cause unnecessary trouble, not only when the work is wrong, but also may cause poor sealing of the side box. The prerequisite for repairing the engine is to know it like the back of your hand and carefully understand the structural diagram of the engine parts.

2. If there is a problem with the motorcycle, it needs to be repaired. If you have strong hands-on ability, you can repair it by yourself. However, if there is a problem with the engine, it is generally more troublesome. Next, I will introduce a few issues that should be paid attention to when disassembling the motorcycle engine.

3. If it is in the first state, you can adjust the (oil-gas mixing ratio screw) on the vaporizer with a plaque screwdriver to solve the problem and achieve the best start-up effect and obtain the maximum power output function of the engine. The main reason why the shell of the engine is too hot is that the ratio of fuel and air is less than 1 to 25.