UEFA European championship

List of contents of this article:

• 1. Is the car fuel saver really fuel-saving? Is it useful?
• 2, Is the installation of an electronic fuel samulator harmful to the car?
• 3, What is the principle of motor vehicle obd fuel saver

Is the car fuel saver really fuel-saving? Is it useful?

It's not true. There are many kinds of fuel savers, some of which are fooling people, and all fuel savers themselves cannot achieve the function of saving fuel. If you install a fuel saving device, you must have good driving habits, because when the horsepower is strong, you will step on the accelerator randomly, which will consume more fuel.

Car fuel-saving devices are useful: the fuel-saving effect of fuel-saving devices, the average fuel-saving range of 5-10% can still be easily achieved.

Looking at all the fuel-saving devices on the market, in fact, all products are effective, but the fuel-saving rate is high or low. And now the common fuel savers are to change the molecular structure of fuel and improve the combustion rate.

This is not true. There are many kinds of fuel savers, some of which are deceptive and fail to achieve the function of saving fuel. If the fuel sader is installed, the driving style and driving habits must be better, because the horse is big, the accelerator will be stepped on randomly, resulting in more fuel consumption. Many consumers who buy fuel-saving devices believe that installing fuel-saving devices can save fuel.

Car fuel-saving devices have no fuel-saving effect. If there is a fuel-saving effect, the scientific researchers of those large automobile factories are digging into the engine to study how to sact fuel.The fuel-saving devices bought outside are all scams. If they can save fuel, those big factories would have bought them long ago.

Is the installation of an electronic fuel sauter harmful to the car?

1. For most cars, the fuel saver is harmless, and it can save fuel consumption. The car fuel saving device can be adjusted by power.The device automatically generates fluid force, so as to meet the current required by the host of the hydraulic fuel saver, and ionizes water into hydrogen and oxygen.

2. If the fuel saving device does not damage the car: make sure that the tire pressure is correct. Change to fuel-efficient tires. Don't change the size of the tire at will. Regularly check whether your driving disc and tires are right. Use the smoothing oil with the lowest viscosity. Maintain the engine well and fix it immediately if there is a problem. Take good care of the car; don't step on the accelerator to accelerate.

3. Hello, if this vehicle is equipped with an electronic fuel saver, there will be no damage to the vehicle. However, once the fuel saving device does not work well, it is easy to cause insufficient engine power.

4. Installing an OBD fuel saver will not cause damage to the car, but it will not help the car save fuel well.

5. Installing an OBD fuel sater will not cause damage to the car.The OBD fuel sater is a power fuel optimization device (based on the OBD protocol), which can adjust the car according to your own driving habits, re-indulate the car computer ECU and adjust it by itself.

What is the principle of motor vehicle obd fuel saving device

1. Working principle: The on-board car fuel saving device is a small gas generation device, which adopts the principle of Faraday electrolysis and uses water electrolysis to produce hydrogen and oxygen, so as to supply steam The gas in the car is added to new energy hydrogen energy, and at the same time, it can provide oxygen to fully burn hydrocarbon fuel.

2. The principle of the water-powered car energy saver is to achieve the purpose of saving fuel by separating water and electricity into hydrogen and oxygen, and then sending the cylinder into the engine to combine with fuel.

3. Working principle: The on-board car fuel saver is a small gas generation device. It adopts the principle of Faraday electrolysis and uses water electrolysis to produce hydrogen and oxygen, so as to add new energy to the gas in the car, and at the same time, it can provide oxygen to fully burn hydrocarbon fuel.

4. Regularly maintain the engine, air filter and silencer, check the spark plug, clean up the carbon, and adjust the tire pressure. Finally, it is to reduce the weight of the car and put all the things that are not commonly used home. The fuel saver is generally connected to the obd interface of the car to achieve the effect of slowing down the accelerator by adjusting the ecu.

5. The principle of hydroelectric vehicle fuel sater: it is to decompose the water and electricity into hydrogen and oxygen, and then send it to the cylinder of the engine to burn with other fuels at the same time. Due to the transfer of oxygenThe fuel of the original engine can be burned more fully, which improves the efficiency of fuel use.