Hearthstone arena deck Builder

List of the contents of this article:

• 1,Hearthstone arena deck Builder How to draw a three-dimensional simple car
• 2, How to fold the simplest three-dimensional car
• 3, Two pieces of card paper to make a three-dimensional car with wheels and can be rolled. How to design it?

How to draw a three-dimensional simple car

Let's draw a parallel line first. You can draw this. If you don't know how to draw it, press it with a ruler. After drawing the parallel lines, draw the car body. First, draw a few strokes gently to draw the general outline. After simply drawing the car body, let's draw the wheels of the car first.

The step first needs to draw the basic outline of the 3D three-dimensional car body, draw the boundaries of the body with thin lines, and mark the hood and other important general parts, as shown in the figure below.

Simple drawing method of cars: First of all, we need to draw two concentric circles. At this time, we should draw circles as much as possible to ensure the beauty. Then draw two tires, trying to keep the two faces, not one big or small.

First, draw a semicircular arc in the middle of the paper with a black pen to represent the roof of the car. Under the roof of the car, draw two fans, one large and one small, indicating the window of the car. On the left and right sides of the roof, draw an arc to represent the front and rear of the car.

First, draw a horizontal cuboid as the car body. Draw two ellipses under the cuboid as wheels.Draw a quadrangular platform on the cuboid as a window and roof. Draw two rectangles on the front of the cuboid as the front lights, and draw an inverted trapezoid in the middle of the two rectangles as the front guardrail.

How to draw a car is simple and beautiful. The steps are as follows: First, draw the wheels of two cars. Then connect the wheels to draw the shape of the car. Draw the lights, windows and doors in turn. Draw the pattern on the wheel. The car body is painted blue. The door is painted dark blue. The wheel is painted gray. The headlights are painted yellow.

The simplest three-dimensional car how to fold

Step 1: Prepare two color cards Step 2: Fold in two, and put the top and bottom sides inward Fold Step 3: Open the origami, fold the two sides inward, and then fold it in two. Open the origami, fold the four corners outward, and fold the two sides outward.

Prepare a square piece of paper. Fold it in fold. Fold one piece of the folded paper in the bottom. Fold the corner backwards on the left side. The right side folds the corner in the direction. Draw the front window of the car on the paper with an oil-based pen.

Gently hold the car with your left hand. Press down on the right side of the fold until it enters the car. Flatten the car, and then draw a crease along the edge with your nails.Fold the upper left corner inward to make a windshield. This time, fold the pocket into a small angle to extend it beyond the front wheel.

The simple folding method of origami car is as follows: First, prepare a piece of colored paper, which is not limited in color, and can be cut into a square according to your favorite color. As shown in the figure below. Then fold it in two folds into the colored paper as shown in Figure 2.

Two pieces of card paper to make a three-dimensional car with wheels and can be rolled. How to design it?

1. Flatten the cardboard box and cut it out according to the shape proportion shown in the figure. Stick the parts well. This is the main body of the car. Color drawing, decoration, headlights and windows are all complete. To make a wheel, the wheel rim is black, black tape or painting is also fe, in short, it should be realistic.

2. Prepare materials: cartons, wide tape, scissors, paper cards, coloring pens. First, seal the carton with wide tape, and then cut it at two-thirds of the seal. Find a piece of cardboard as the windshield of the car. Make 4 wheels out of cardboard and fix them on both sides of the carton.

3. Steps At one end of the long cardboard box, cut out the notch as shown in the figure. Sort out and fold the box tongue. As shown in the figure, fold the upper mouth down. Cut the color card paper into small pieces and draw images on it. Glue the avatar card to the box with glue.

4. Continue to cut out 4 large circles (as car wheels), 1 small circle (as car steering wheel), and 1 oval (as car seat) with a paper plate or thick paper. Then color the car body with red pigment, wait for the pigment to dry and draw decorative symbols on the car body with a brush (other small parts are also colored).

5. First, find a small beverage cylinder, pierce two sets of symmetrical holes on it, and put two wires into it as the axle. Cut it into a circle with cardboard and process it into wheels. Then install the wheels on the axle separately.

6. Prepare four colors of colored clay. 2. First, use blue to pinch a rectangle as the lower half of the car body. 3. Then pinch a square with blue and put it on the rectangular body as the roof of the car. 4. Squeeze four small white squares with white and stick them around the car as four pieces of glass on the window.